Apply without a heat press.
A household iron is an option for transfers specifically rated for ironing.
Check before ordering
Tell Kell you plan to use a household iron. Ask which films and garments are suitable. A transfer marked heat-press only needs a heat press. Choose a small design you can press evenly.
Prepare the iron and garment
Use a stable, firm, heat-safe surface and keep steam switched off. Check the maximum temperature on the garment label and use the transfer supplier’s approved iron setting. Test on a matching scrap.
Press in place
Smooth the fabric, place the adhesive against it and keep the carrier on top. Use the specified protective sheet. Hold the iron still and press down for the recommended time. Lift and reposition with the overlap directed for your film.
Peel, check and finish
Follow the specified hot, warm or cold peel. If an edge comes up, stop peeling and check the film instructions before pressing again. Complete any covered finishing press, cool fully and wait before washing.
DTF Transfers Australia · Iron-compatible films