Use your Cricut with DTF.
Use a cutting machine to plan your layout and a compatible heat press to apply the finished transfer.
Plan the placement in Design Space
Measure the garment’s flat printable area. In Design Space, make a rectangle at those dimensions and size a preview of your design inside it. Keep the print within 11 inches (27.94 cm) wide and clear of seams.
Start with a printed transfer
Your Kell Bent transfer arrives printed on its carrier. Leave the Maker or Explore cutter out of the application step. There is no vinyl to weed and no cut job to send. If several designs share one sheet, separate them carefully with scissors.
Set up your EasyPress
Check that your film supports a craft press and that the plate can cover the design as directed. Place the garment on a pressing mat over a firm, heat-safe surface. Use the temperature, time and pressure supplied for your transfer.
Press, peel and finish
Apply with the adhesive against the fabric and the carrier up. Hold the EasyPress steady for the stated time. Return it to its base, peel as directed and follow the film’s finishing instructions. A Cricut Mini requires explicit film compatibility.
Cricut Help Center · Direct-to-film transfers